Flat editorial illustration of a round olive-gray screen resting on a thin line with a red voice waveform on its face, representing a small round Muse gadget that answers out loud
|

I Built a Muse Gadget on a $40 Round ESP32 Screen

The other night a video came across my feed for a “photo pin.” A little round screen you wear on your shirt that shows pictures.

My first thought was that I already own that. Mine cost about forty dollars. And mine talks back.

It is a Muse gadget, built with Meta’s free Muse Gadgets SDK. It sits on my desk, about the size of a big watch face. I hold a button, ask it something, and it answers out loud.

You do not buy it finished. You buy a board and spend about an hour. Here is how that hour went.

What the Muse Gadgets SDK actually is

Muse is Meta’s personal AI agent. In October Meta released the Muse Gadgets SDK, a free, open source kit that lets cheap hobby hardware run it. You load the kit onto a small board, pair the board with the Muse app on your phone, and you have an assistant that lives outside your phone.

Hold the button, talk, let go. It answers through its own speaker and can put pictures on the screen. That is the whole loop.

Why the Waveshare ESP32-S3-Touch-AMOLED-1.75C

The kit lists dozens of supported boards now. I went with the Waveshare ESP32-S3-Touch-AMOLED-1.75C (that is an affiliate link, so I may earn a small commission if you buy through it, at no extra cost to you).

The name is a mouthful, so here is the plain version: a round 1.75 inch touchscreen with a tiny ESP32 computer behind it, two microphones, a speaker, a battery plug and a metal case. It was $39.99 the day I wrote this. It is also the ESP32 board that the launch coverage named as the recommended pick.

I picked it for a boring reason: there is nothing to add.

Most hobby boards show up as a bare green rectangle. You wire on a microphone, then a speaker, then figure out power, then print a case. Every one of those steps is a place for a weekend to die.

This one has the mics, the speaker and the battery charging built in, and the “C” version comes in an aluminum case. The screen is AMOLED, which means black is truly black, so whatever is on it looks like it is floating on the glass. It looks like something sold in a store.

There is a cheaper version without the case. Buy the one with the C unless you own a 3D printer and want to make your own.

Setting up the Muse gadget: the hour

You need the board, a USB-C cable, a computer, the Muse app, and a free developer token from Meta’s gadget site.

Here is the part I liked most. I did not type the install commands. The kit ships with a set of instructions written for AI coding assistants. I opened Claude Code in the folder and said, more or less, “I have this exact board. Build the Muse software for it and load it on.” It did the rest and told me when the gadget was ready to pair.

Pairing happens in the Muse app. Turn on developer mode, open Settings, then Devices, and the gadget shows up by name. Press the button on the gadget to prove it is yours, give it your Wi-Fi. Done.

The kit also has a flasher that runs in the Chrome or Edge browser. I did not use it, so I cannot tell you how it goes with this board.

What tripped me up

Windows. The directions I followed were written for Mac and Linux, and the helper scripts broke on my Windows 11 machine. The fix was to do the build inside a ready-made container from the chip maker and then load the result onto the board from Windows directly. It works fine. It just was not in the manual.

The cable. A lot of USB-C cables only carry power. If the computer cannot see the board, swap the cable before you blame anything else. I say this as a man with a drawer full of the wrong ones, and as someone who wrote a whole post about checking the dumb stuff first.

The version number. The build tools have to be the exact version the kit names. Newer is not better here. If you let an AI assistant do the setup, it reads that rule for you.

The battery. It is a small battery in a small thing. Expect hours of real use, not days. Leave it resting and it lasts a lot longer.

Who should buy one

If you like the idea of a weekend project that ends with something you would leave on your desk, this is the cheapest good one I have found. Forty dollars, one hour, no soldering. I have said before that one finished thing beats ten rough ones, and this is a project that finishes.

If you want a finished gadget with a warranty and a help line, this is not that. It is a kit. A friendly kit, but a kit.

And it is Meta on the other end. If you would not hand Meta a microphone, that settles it before the cable does.

The honest surprise for me was how different it feels to ask a question out loud to an object. A phone wants to show you forty other things on the way to your answer. This thing answers and goes quiet.

If you want to build one

The board is here. Get the 1.75C.

I also wrote out every step, with the Windows fix and the exact commands, in a full build guide. Start there once the board arrives.

I kept going after that first hour and ended up writing my own software for it. That is a longer story for another day.

Forty dollars used to buy a board that blinked a light. Now it buys one that answers.

Similar Posts